Ashapura Minechem Ltd

Cetcrete SBR is a styrene butadiene polymer based latex specially developed to form matrix cement. It is used in mortar and concrete as an admixture to increase water resistance, wear resistance and durability.

Advantages:

• Excellent bonding old to new concrete.
• Improved tensile & flexural strength.
• High resistance to water penetration
• Increases durability and toughness.

Area of application:

• Concrete repair: Spelled concrete, repairing floors and pre-cast slabs.
• Floor Screeds & Toppings: Abrasion resistant and non-dusting floors, underlay for special finishes, mild chemical and effluent – resistant floors.
• External Rendering: Waterproof, weatherproof and frost resistant render
• Waterproofing: Basements, water towers, tanks, effluent tanks, swimming pools, bedding tiles fixing or re-fixing slip bricks, bonding new concrete to old.

• Application of Cetcrete SBR cement slurry in a ration of 1:1 as bond coat on the entire existing substrate including the reinforcement

• Cement: 50 Kg
• Sand: 125Kg
• Cetcrete SBR: 10 Kg
• Water: 6 to 8 Lt.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete SBR one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrete SBR is a styrene butadiene polymer based latex specially developed to form matrix cement. It is used in mortar and concrete as an admixture to increase water resistance, wear resistance and durability.

Advantages:

• Excellent bonding old to new concrete.
• Improved tensile & flexural strength.
• High resistance to water penetration
• Increases durability and toughness.

Area of application:

• Concrete repair: Spelled concrete, repairing floors and pre-cast slabs.
• Floor Screeds & Toppings: Abrasion resistant and non-dusting floors, underlay for special finishes, mild chemical and effluent – resistant floors.
• External Rendering: Waterproof, weatherproof and frost resistant render
• Waterproofing: Basements, water towers, tanks, effluent tanks, swimming pools, bedding tiles fixing or re-fixing slip bricks, bonding new concrete to old.

• Application of Cetcrete SBR cement slurry in a ration of 1:1 as bond coat on the entire existing substrate including the reinforcement

• Cement: 50 Kg
• Sand: 125Kg
• Cetcrete SBR: 10 Kg
• Water: 6 to 8 Lt.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete SBR one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrete SBR is a styrene butadiene polymer based latex specially developed to form matrix cement. It is used in mortar and concrete as an admixture to increase water resistance, wear resistance and durability.

Advantages:

• Excellent bonding old to new concrete.
• Improved tensile & flexural strength.
• High resistance to water penetration
• Increases durability and toughness.

Area of application:

• Concrete repair: Spelled concrete, repairing floors and pre-cast slabs.
• Floor Screeds & Toppings: Abrasion resistant and non-dusting floors, underlay for special finishes, mild chemical and effluent – resistant floors.
• External Rendering: Waterproof, weatherproof and frost resistant render
• Waterproofing: Basements, water towers, tanks, effluent tanks, swimming pools, bedding tiles fixing or re-fixing slip bricks, bonding new concrete to old.

• Application of Cetcrete SBR cement slurry in a ration of 1:1 as bond coat on the entire existing substrate including the reinforcement

• Cement: 50 Kg
• Sand: 125Kg
• Cetcrete SBR: 10 Kg
• Water: 6 to 8 Lt.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete SBR one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrete SBR is a styrene butadiene polymer based latex specially developed to form matrix cement. It is used in mortar and concrete as an admixture to increase water resistance, wear resistance and durability.

Advantages:

• Excellent bonding old to new concrete.
• Improved tensile & flexural strength.
• High resistance to water penetration
• Increases durability and toughness.

Area of application:

• Concrete repair: Spelled concrete, repairing floors and pre-cast slabs.
• Floor Screeds & Toppings: Abrasion resistant and non-dusting floors, underlay for special finishes, mild chemical and effluent – resistant floors.
• External Rendering: Waterproof, weatherproof and frost resistant render
• Waterproofing: Basements, water towers, tanks, effluent tanks, swimming pools, bedding tiles fixing or re-fixing slip bricks, bonding new concrete to old.

• Application of Cetcrete SBR cement slurry in a ration of 1:1 as bond coat on the entire existing substrate including the reinforcement

• Cement: 50 Kg
• Sand: 125Kg
• Cetcrete SBR: 10 Kg
• Water: 6 to 8 Lt.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete SBR one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrack is a specially formulated cement-based polymer modified powder for filling cracks in plastered surfaces. When mixed with water forms a creamy consistent paste which is easy to use for filling cracks.

Advantages:

• Good adhesion
• Smooth finish
• High tensile strength
• Non shrink

Area of application:

• Repairing of cracks in internal and external plaster to give a thin render coat to even out surface.

• Clean the crack to remove all loose material. If crack is too fine, it must be broken to ascertain its actual width and depth. Ensure the surface is free from oil, dust and grease.
• Develop the cracks in ‘v’shaped groove.
• Sprinkle water on prepared groove to remove loose particles.
• Mix 3.5 volumes of crack filler Cetcrack to one part of water to get uniform consistency.
• Apply this past to a clean groove & press properly finishes the surface as desired.
• Painting work can start after 24 hours.

Cetpatch RP is a polymer modified ready to use powder with selected additives for quick and reliable sealing and plugging of leaks.

Advantages:

• Cetpatch RP is an unsurpassed, quick water sealing material for the repair of leaks, water seepage in cellars, tunnels basement etc.
• Cetpatch RP sets hydraulically without shrinkage.
• Sealing is permanent.
• Also use as fixing agent.

• Cetpatch RP can be use everywhere, where a quick and reliable sealing in necessary even against water pressure
• While waterproofing jobs especially where continuous seepage of water does not enable conditions to carry out any waterproofing treatments
• Steel construction & electrical installations
• Sanitary plumbing installations
• General fitting work

• Cetpatch RP in small amounts with water knead it into a paste and mould it into a plug shaped and press until, the plug shaped mass.
• Hold it immediately against water leak in the joint and press until, the plug sets.
• Setting time can be accelerated by using hot water.
• Should prepared Cetpatch RP show signs of hardening before plugging, it must not be considered for further use and addition of water in this case in not permissible.

Range of Cetpatch FH are supplied as a ready to use factory controlled cementitious system blended with special aggregates selected for high abrasion and wear resistance and additives. Based on non-metallic non oxidizing aggregate used to produce an impact and wear resistant, dust free surface suitable for most heavy-duty area.

Advantages:

• Highly impact and abrasion resistance
• Long lasting wear resistant surface
• Dry shake on applied over fresh concrete to provide a monolithic bond.
• Ready to use, factory controlled eliminates on site mixing
• Resists oil and grease penetration and reduces dusting
• Low maintenance and easy to use
• Non slip and anti-skid

• The base concrete should have a minimum cement of 300 kg/cm2 with a slump of 40-60 mm with low water cement ratio. (can be use Cetproof CA). 
• The bleeding watershould evaporate and Cetpatch FH can be broadcast after initial set.
• Cetpatch FH is broadcast evenly manually and when the surface darkness with the absorption of water the surface is floated.
• To apply second application immediate.

Cetpatch GP is a single pack ready to use high strength, free flowing non- shrink grout. Cetpatch GP is blend of specially processed cement and special fillers free from corrosive substances and additives.

Advantages:

• Pre packed: No batching or blending errors consistency in performance form batch to batch.
• Non-shrink: Eliminates shrinkage commonly encountered in both plastic and hardened phases.
• Free flow: Free flowing self-levelling grout. Easy placement and filling of under based of machinery.
• High strength: Early load transfer and rapid installation.
• Iron free: No deterioration of grout due to rust expansion