Call 08048939499 83% Response Rate

our range

Tile Adhesives

Prominent & Leading Manufacturer from Kutch, we offer cetfix bla 2017 block laying adhesive, cetfix gta 2417 glass mosaic tile adhesive, cetfix nsa 1917 tile adhesive, cetfix hta 2017 high strength tile adhesive, cetfix tg 2517 cementitious tile jointing grout and cetfix flex 2117 granite adhesive.
  • Cetfix BLA 2017 Block Laying Adhesive
  • Cetfix BLA 2017 Block Laying Adhesive
Cetfix BLA 2017 Block Laying Adhesive

Cetfix BLA 2017 Block Laying Adhesive

Rs 599  / BagGet Best Price

Product Brochure

BrandCetfix
Packaging Size40 Kg
Packaging TypeBag
Application IndustryConstruction
FormPowder
Country of OriginMade in India
Coverage6 to 6.5 sqm. per 20 kg bag at 3 mm bedding thickness

Cetfix BLA is polymer modified cement-based powder, needs to be mixed with water for installation of AAC block. The unique chemical combination enables this mortar to be more compact, thinner and more versatile at only 3 mm thick against 12 to 18 mm conventional mortar.

Advantages:

  • High adhesive strength, Improve overall masonry strength and load bearing capacity.
  • Excellent bonding and waterproofing.
  • Pre-mixed and ready to use, only water is to be added at site.
  • No water curing is required after application, so plastering just after 24 hours of application.
  • Easy to mix and easy to use. Reduces labour cost.
  • Economical: quantity of mortar is far less than conventional mortar


Area of application:

  • Laying and jointing of masonry, AAC blocks, fly ash bricks, and hollow blocks.
  • Jointing of pre-stressed concrete slabs, panels.
  • Jointing of concrete window and door frames.

Mixing:
  • Mix 3 parts Cetfix BLA and 1 part of water by volume to stiff consistency.
  • Leave for 5-minute, remix and use within 45 minutes.

Application:
  • Apply a thin uniform layer of Cetfix BLA 3 to 4 mm thick, on the levelled surface of masonry units using proper trowel.
  • Place the next course of masonry units on the evenly laid jointing mortar bed in proper line & level.
  • Clean the excess material, if any immediately, Continue the procedure for the entire masonry works.

View Complete details

get quoterequest a call back
  • Cetfix GTA 2417 Glass Mosaic Tile Adhesive
  • Cetfix GTA 2417 Glass Mosaic Tile Adhesive
Cetfix GTA 2417 Glass Mosaic Tile Adhesive

Cetfix GTA 2417 Glass Mosaic Tile Adhesive

Rs 900  / BagGet Best Price

Product Brochure

BrandCetfix
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationGlass Mosaic Tiles, Glass Tiles, Internal or External Application
FormPowder
ColorWhite
Country of OriginMade in India

Cetfix GTA is polymer modified white cement based powder needs to be mixed with water for installation glass mosaic tile and glass tiles on internal and external cladding.

Advantages:

  • Excellent adhesion, low shrinkage
  • Accommodate physical & thermal movements
  • Ready to use, No curing required
  • Floor can be used after 24 hours

Mixing:
  • Mix 3 parts Cetfix GTA and 1 part of water by volume to stiff consistency.
  • Leave for 5 minute and remix.
  • Use within 60 minute.

Application:
  • Spread the adhesive to a required bed thickness and comb with notched trowel.
  • Then start placing the Glass tiles or Glass mosaic sheet on the surface within 15 to 20 min.
  • Clean off surplus adhesive from the tile face and between joints.
  • Joint filler Cetfix TG apply after 24 hours.


Coverage:

  • Glass Mosaic: 6 to 6.5 sqm. per 20 kg bag at 1.5 mm bedding thickness.
  • Glass Tiles: 4 to 4.5 sqm. per 20 kg bag at 3 mm bedding thickness.

View Complete details

get quoterequest a call back
  • Cetfix NSA 1917 Tile Adhesive
  • Cetfix NSA 1917 Tile Adhesive
  • Cetfix NSA 1917 Tile Adhesive
  • Cetfix NSA 1917 Tile Adhesive
  • Cetfix NSA 1917 Tile Adhesive
Cetfix NSA 1917 Tile Adhesive

Cetfix NSA 1917 Tile Adhesive

Rs 575  / BagGet Best Price

Product Brochure

BrandCetfix
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationPlastered Wall, Bathroom, Swimming Pool, Kitchen Wash Area
FormPowder
Coverage4.5 to 5 sqm. per 20 kg bag at 3 mm bedding thickness
Country of OriginMade in India

Cetfix NSA is polymer modified cement based powder needs to be mixed with water for installation tiles over tile or smooth surface without removing old tiles or hacking the surface.

Advantages:

  • Excellent waterproofing characteristics
  • Ready to use, No curing required
  • Soaking of tiles not required
  • Reduces labour cost
  • Excellent adhesion, low shrinkage.


Area of Application :
Suitable for Tile on Tile application

Surface Preparation:

  • The surface should be sound and thoroughly cleaned.

Mixing: 
  • Mix 3 parts Cetfix NSA and 1 part of water by volume to stiff consistency. 
  • Leave for 5 minute and remix. 
  • Use within 45 minutes.

Application:
  • Spread the adhesive to a required bed thickness and comb with notched trowel.  
  • Then start placing the tiles on the surface within 15 to 20 min.  
  • Press the tiles firmly into position with a slight twisting action. 
  • Clean off surplus adhesive from the tile face and between joints. 
  • Joint filler Cetfix TG apply after 24 hours.

View Complete details

get quoterequest a call back
  • Cetfix HTA 2017 High Strength Tile Adhesive
  • Cetfix HTA 2017 High Strength Tile Adhesive
  • Cetfix HTA 2017 High Strength Tile Adhesive
  • Cetfix HTA 2017 High Strength Tile Adhesive
  • Cetfix HTA 2017 High Strength Tile Adhesive
Cetfix HTA 2017 High Strength Tile Adhesive

Cetfix HTA 2017 High Strength Tile Adhesive

Rs 725  / BagGet Best Price

Product Brochure

BrandCetfix
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationVitrified Tiles for Floor, Natural Stone, Dholpur Stone, Interior & Exterior Stone Cladding
FormPowder
StrengthHigh
Coverage2 to 2.5 sqm. per 20 kg bag at 6mm bedding thickness
Country of OriginMade in India

Cetfix HTA is a polymer modified cement based powder needs to be mixed with water for installation large vitrified tile and natural stone on internal and external cladding.

Advantages:

  • Excellent adhesion, low shrinkage
  • Accommodate physical & thermal movements
  • Ready to use, No curing required
  • Floor can be used after 24 hours

Surface Preparation:
  • The surface should be sound and thoroughly cleaned.

Mixing:
  • Mix 3 parts Cetfix HTA and 1 part of water by volume to stiff consistency.
  • Leave for 5 minute and remix.
  • Use within 30 minutes. 

Application:
  • Spread the adhesive to a required bed thickness and comb with notched trowel. 
  • Then start placing the Dholpur tiles on the surface within 15 to 20 min. 
  • Press the Dholpur firmly into position with a slight twisting action.
  • Clean off surplus adhesive from the Dholpur tile face and between joints.
  • Joint filler Cetfix TG apply after 24 hours.

View Complete details

get quoterequest a call back
Cetfix TG 2517 Cementitious Tile Jointing Grout

Cetfix TG 2517 Cementitious Tile Jointing Grout

Rs 85  / PouchGet Best Price

Product Brochure

BrandCetfix
Usage/ApplicationBathroom, Kitchen Wash Area, Swimming Pool
Packaging Size1 Kg
Packaging TypePouch
Joint WidthMax 5 mm
ColorWhite
Country of OriginMade in India
FormPowder

Cetfix TG is polymer modified cement based tile joint colour grout for filling joints of ceramics tiles, vitrified tiles, marble, natural stone, terrazzo, granite and glass mosaic tiles.

Advantages:

  • Waterproof
  • Crack-proof
  • Peel-proof
  • Easy to use and clean
  • Uniform color, ready to use

Mixing:
  • The tilling joint should be made clean, dry and free from contamination.
  • Mix 3 to 3.5 parts Cetfix TG and 1 part of water by volume to smooth consistency.
  • Leave for 5 minute and remix, use within 60 minutes.

Application:
  • Apply the paste to the joints with a sponge / squeeze trowel.
  • Remove surplice Cetflix TG  with a damp sponge.
  • Allow 24 hours for the filling to dry. Then polish the tile with clean, dry cloth.
  • Joint filler Cetfix TG should be used after 24 hours tiles fixing.

Color: Off White, Ivory and Light Grey

Coverage:
Depends on the tile and width of the joint, for 2mm deep joints coverage is given below for just indicative and coverage can vary as per the site conditions and type of tiles.

Size of Tiles (inch x inch)Tile Thickness (mm)Consumption per kg/per sqm. (For 2 mm joint)
12 x 12100.3
16 x 16100.26
18 x 18120.25
24 x 24120.22
36 x 36150.16

    View Complete details

    get quoterequest a call back
    • Cetfix FLEX 2117 Granite Adhesive
    • Cetfix FLEX 2117 Granite Adhesive
    Cetfix FLEX 2117 Granite Adhesive

    Cetfix FLEX 2117 Granite Adhesive

    Rs 1,350  / SetGet Best Price

    Product Brochure

    BrandCetfix
    Packaging Size30 Kg combo pack (20 Kg powder + 10 Kg polymer liquid)
    Packaging TypePowder: Bag, Liquid: Bucket
    Country of OriginMade in India
    Usage/ApplicationGranite/Italian and Internal/External Vertical Cladding, Tile On Wood & Plywood Application
    FormPart A: Powder, Part B: Liquid

    Cetfix FLEX is polymer modified two parts adhesive comprising polymer cement based powder and rubber based liquid. Flexible for use in area where tiling is likely to be subject to some limited background movement or vibration, especially for wood and plywood.

    Advantages:

    • Excellent adhesion, low shrinkage.
    • Accommodate physical & thermal movements
    • Soaking of tiles not required

    Surface Preparation:
    • The surface should be sound and thoroughly cleaned.

    Mixing:
    • Pour the Cetfix FLEX 10 kg liquid into a suitable container.
    • Add Cetfix FLEX Powder 20 kg to the above mix for2 to 4 minutes to obtain smooth, lump free slurry.
    • It is advised to mix in small quantities (Powder 2-part Flex Powder + 1-part Flex liquid)
    • Leave for 5 minute and remix.
    • Use within 45 to 60 minutes.

    Application:
    • Spread the adhesive to a required bed thickness and comb with notched trowel. 
    • Then start placing the tiles on the surface within 15 to 20 min. 
    • Press the tiles firmly into position with a slight twisting action.
    • Clean off surplus adhesive from the tile face and between joints.
    • Joint filler Cetfix TG apply after 24 hours.


    Coverage:

    • For Granite & Italian Marble: 2.5 to 3 sqm. per 30 kg combo pack at 6 mm bedding thicknes
    • For Wood & Plywood application: 5.5 to 6 sqm. in 30 kg combo pack at 3 mm bedding thickness.

    View Complete details

    get quoterequest a call back
    • Cetfix MTA 2217 Marble Adhesive
    • Cetfix MTA 2217 Marble Adhesive
    Cetfix MTA 2217 Marble Adhesive

    Cetfix MTA 2217 Marble Adhesive

    Rs 890  / BagGet Best Price

    Product Brochure

    Country of OriginMade in India
    BrandCetfix
    Packaging Size20 Kg
    Packaging TypeBag
    Surface Of ApplicationMarble for floor
    FormPowder
    ColorWhite
    Coverage2 to 2.5 sqm. per 20 kg bag at 6mm bedding thickness

    Cetfix MTA is polymer modified white cement based powder needs to be mixed with water for installation large vitrified tile and natural stone on internal and external cladding.

    Advantages:

    • Excellent adhesion, low shrinkage
    • Accommodate physical & thermal movements
    • Ready to use, No curing required
    • Floor can be used after 24 hours

    Surface Preparation:
    • The surface should be sound and thoroughly cleaned.

    Mixing:
    • Mix 3 parts Cetfix MTA and 1 part of water by volume to stiff consistency.
    • Leave for 5 minute and remix.
    • Use within 60 minutes.

    Application:
    • Spread the adhesive to a required bed thickness and comb with notched trowel. 
    • Then start placing the marble on the surface within 15 to 20 min. 
    • Press the marble firmly into position with a slight twisting action.
    • Clean off surplus adhesive from the marbleface and between joints.
    • Joint filler Cetfix TG apply after 24 hours

    View Complete details

    get quoterequest a call back

    EXPLORE MORE CATEGORIES