Ashapura Minechem Ltd

Cetproof IWC is based on processed modified ligno sulphonates and additives which is supplied as brown liquid easily dispersible in water. Cetproof IWC ensures the waterproofing by two ways - increase workability in concrete by reduction of water will result hence and impermeable concrete.

Advantages:

• Improves workability of concrete.
• Reduces permeability through the depth of concrete. 
• Prevents segregation and bleeding.
• Increases durability of concrete and results in better surface finish.
• Strength of the concrete is maintained.
• Prevents formation of cracks due to reduction in shrinkage.

• Cetproof IWC should be added with the measured gauge water. It should not be added to the dry cement/mix.

Cetcrete AR is saponification-resistant acrylic co-polymer dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and looseparticles from the surface by wire brush.
• For best results, damp the surface before coating.
• Pour the Cetcrete AR one part of liquid into a suitable container.
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint.
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hours of first coat with other direction.

Cetcrete AR is saponification-resistant acrylic co-polymer dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and looseparticles from the surface by wire brush.
• For best results, damp the surface before coating.
• Pour the Cetcrete AR one part of liquid into a suitable container.
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint.
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hours of first coat with other direction.

Cetcrete AR is saponification-resistant acrylic co-polymer dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and looseparticles from the surface by wire brush.
• For best results, damp the surface before coating.
• Pour the Cetcrete AR one part of liquid into a suitable container.
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint.
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hours of first coat with other direction.

Cetcrete AR is saponification-resistant acrylic co-polymer dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and looseparticles from the surface by wire brush.
• For best results, damp the surface before coating.
• Pour the Cetcrete AR one part of liquid into a suitable container.
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint.
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hours of first coat with other direction.

Cetcrete Latex is acrylic co-polymer latex based dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete Latex one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrete Latex is acrylic co-polymer latex based dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete Latex one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetproof No.1 powder is supplied as a fine powder ready to use for immediate use with concrete or cement mortar admixture to fill natural pores within the concrete or mortar matrix to reduce porosity. 

Advantages:

• Easy to use simple application.
• High quality does not content limestone powder.
• Reduces capillary action shrinkage cracks.

Area of application:

• Basements, water tanks, bathrooms.
• Roof slabs and screeds.
• Balconies and external plastering.

• Sprinkle 500 g of Cetproof No.1 powder evenly over 50 kg of cement. 
• Mix the dry materials of mortar or concrete until an even colour is obtained. 
• Add water to the required workability.
• Mix thoroughly for at least two minutes continuously. 

Cetproof IWC is based on processed modified ligno sulphonates and additives which is supplied as brown liquid easily dispersible in water. Cetproof IWC ensures the waterproofing by two ways - increase workability in concrete by reduction of water will result hence and impermeable concrete.

Advantages:

• Improves workability of concrete.
• Reduces permeability through the depth of concrete. 
• Prevents segregation and bleeding.
• Increases durability of concrete and results in better surface finish.
• Strength of the concrete is maintained.
• Prevents formation of cracks due to reduction in shrinkage.

• Cetproof IWC should be added with the measured gauge water. It should not be added to the dry cement/mix.

Advantages:

• Excellent scrub resistance with special crosslinking polymer.
• Excellent resistance to water. 
• Superior finish, economical cost cutting & easy to use.

• Cetcrete PDP+ should be added with the measured gauge water. 
• It should not be added to the directly in paints, distempers or dry powder of Wall Putty. 
• 1 kg Cetcrete PDP+ for 20 kg paints or distempers and 40 kg wall putty Cetcoat SF or Lotus should be adjusted by 35-40% of water to stiff consistency by using suitable mixer. 
• Leave the mixture for 5 minutes, remix again & use.

Cetcrete Latex is acrylic co-polymer latex based dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete Latex one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetcrete Latex is acrylic co-polymer latex based dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars.

Advantages:

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application:

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• Pour the Cetcrete Latex one part of liquid into a suitable container. 
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint. 
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Cetproof IWC is based on processed modified ligno sulphonates and additives which is supplied as brown liquid easily dispersible in water. Cetproof IWC ensures the waterproofing by two ways - increase workability in concrete by reduction of water will result hence and impermeable concrete.

Advantages:

• Improves workability of concrete.
• Reduces permeability through the depth of concrete. 
• Prevents segregation and bleeding.
• Increases durability of concrete and results in better surface finish.
• Strength of the concrete is maintained.
• Prevents formation of cracks due to reduction in shrinkage.

• Cetproof IWC should be added with the measured gauge water. It should not be added to the dry cement/mix.

Cetproof IWC is based on processed modified ligno sulphonates and additives which is supplied as brown liquid easily dispersible in water. Cetproof IWC ensures the waterproofing by two ways - increase workability in concrete by reduction of water will result hence and impermeable concrete.

Advantages:

• Improves workability of concrete.
• Reduces permeability through the depth of concrete. 
• Prevents segregation and bleeding.
• Increases durability of concrete and results in better surface finish.
• Strength of the concrete is maintained.
• Prevents formation of cracks due to reduction in shrinkage.

• Cetproof IWC should be added with the measured gauge water. It should not be added to the dry cement/mix.

Cetproof PA is based on processed ligno sulphonate. Generally, cement particles tend to clump together and works by improving the dispersion or the bubbles within the mortar mix which ensures that the cement is used more efficiently.

Advantages: 

• Increases plasticity and prolonged workability.
• Easier speeding and adjustment of bricks and block.
• Reduces dropping and wastage of the mortar cost saving.
• Reduce durable and improved finishes.
• Minimize shrinkage cracking and crazing in screeds or renders.
• Reduces water absorption and penetration.
• Provides cohesive, non-bleeding without any segregation

 
Other Details:

• Cetproof PA is powder mortar admixture which interrupts the formation of capillary channels and hence, improves mortar’s resistance to rain water and dampness.
• Cetproof PA reduces the quantity of water required to achieve the workability, thus reducing the possibility of drying, shrinkage, which can result in cracking and crazing.

• Sprinkle 500 g of Cetproof PA powder evenly over 50 kg of cement. 
• Mix the dry materials of mortar or concrete until an even colour is obtained. 
• Add water to the required workability.
• Mix thoroughly for at least two minutes continuously.

Cetcon 2K is two component acrylic polymer modified elastomeric cementations coating, consists of specially selected cements, graded hard wearing aggregates and additives supplied in powder and polymer emulsion liquid component.

Advantages:

• Elastomeric with thermal expansion similar to concrete. 
• Excellent bond to concrete and masonry. 
• Weather resistance, prevents concrete from corrosion by atmosphere. 
• Provides a durable coating. 
• Excellent for leaking brick and masonry walls, damp proofing of basements.
• Non-toxic, ideal for potable water tanks.

• Remove all dirt and loose particles from the surface by wire brush. 
• For best results, damp the surface before coating. 
• For best result used primer coat: 1 Part of Cetcrete AR and 4-part water use as primer coat on wet surface. 
• Pour the Cetcon 2K liquid into a suitable container. 
• Add Cetcon 2K Powder to the above mix in small quantities and mix for 2 to 4 minutes to obtain smooth, lump free slurry. 
• Apply the mixed material with a stiff brush marking out the area, applying like a paint. 
• Keep stirring the mixed material to avoid setting during application. 
• Apply second coat after 6 to 8 hours of first coat other direction.